N, N'-disubstituted Ureas as Novel Antiplatelet Agents: Synthesis, Pharmacological Evaluation and In Silico Studies.

INTRODUCTION: Thrombotic disorders are among the leading causes of morbidity and mortality worldwide. Drugs used in the prevention and treatment of atherothrombosis have pharmacokinetic limitations and adverse effects such as hemorrhagic conditions, highlighting the importance of developing more effective antiplatelet agents. ethod: In this work, we synthesized N,N'-disubstituted ureas 3a-3j and evaluated their antiplatelet profiles through in vitro, ex vivo, and in silico studies. The synthesized derivatives exhibited a selective inhibitory profile against platelet aggregation induced by arachidonic acid (AA) in vitro, without significantly affecting other aspects of primary hemostasis and blood coagulation. The compounds that showed inhibition greater than 85% were submitted to the analysis of their potency by calculating the concentration required to inhibit 50% of platelet aggregation induced by AA (IC50). Urea derivative 3a was the most potent with IC50 of 1.45 µM. Interestingly, this derivative inhibited more than 90% of platelet aggregation induced by AA ex vivo, with a similar effect to acetylsalicylic acid. In the hemolysis assay, most of the urea derivatives presented values below 10% suggesting good hemocompatibility. Additionally, the compounds tested at 100 µM also showed no cytotoxic effects in HepG2 and Vero cells. RESULT: The in silico results suggested that compound 3a may bind to the key residue of COX-1 similar to AA and known COX-1 inhibitors, and the results are also in agreement with our SAR, which suggests that the inhibition of this enzyme is the most likely mechanism of antiplatelet activity. CONCLUSION: Therefore, these results demonstrated that N,N'-disubstituted ureas are promising candidates for the development of novel antiplatelet agents.

Development of SEDDS formulation containing caffeine for dermal delivery.

OBJECTIVE: The objective of this work was to develop a self-emulsifying drug delivery system (SEDDS) containing caffeine for the treatment of cellulite. METHODS: SEDDS were prepared using the solution method. 0.5% (w/v) caffeine was added to the previously selected excipients. The system was characterized by droplet size, zeta potential, emulsification time and long-term stability. In vitro release and skin permeation were investigated using Franz-type diffusion cells. The cytotoxicity was evaluated on normal human keratinocytes. RESULTS: Caffeine SEDDS were thermodynamically stable, with a zeta potential less than - 22 mV and droplet size around 30 nm, and were long-term stable. The permeation study showed that the formulation promoted caffeine accumulation in the skin layers, suggesting an increase in local circulation. Cytotoxicity studies on HaCaT cells were not conclusive as the surfactant used indicated false-positive results due to its high molar mass. CONCLUSION: It was possible to obtain a stable SEDDS that could cause an increase in blood flow in the applied area, resulting in cellulite reduction.

OBJECTIF: L'objectif de ce travail était de développer un système d'administration de médicaments auto-émulsifiants (SEDDS) contenant de la caféine pour le traitement de la cellulite. MÉTHODES: Les SEDDS ont été préparés par la méthode en solution. 0,5 % (p/v) de caféine a été ajouté aux excipients préalablement sélectionnés. Le système a été caractérisé par la taille des gouttelettes, le potentiel zêta, le temps d'émulsification et la stabilité à long terme. La libération in vitro et la perméation cutanée ont été étudiées dans des cellules de diffusion de type Franz. La cytotoxicité était évaluée sur des kératinocytes humains normaux. RÉSULTATS: Les SEDDS de caféine étaient thermodynamiquement stables, avec un potentiel Zeta inférieur à -22 mV et une taille de gouttelettes d'environ 30 nm, et stables à long terme. L'étude de perméation a montré que les formulations favorisent l'accumulation de caféine dans les couches de la peau, suggérant une augmentation de la circulation locale. Les études de cytotoxicité sur les cellules HaCaT n'ont pas été concluantes car le surfactant utilisé indique des résultats faussement positifs dus à une masse molaire élevée. CONCLUSION: Il a été possible d'obtenir un SEDDS stable qui peut provoquer une augmentation du flux sanguin dans la zone appliquée, entraînant une réduction de la cellulite.

Comparison of in vitro, in vivo, and in silico bioavailability results of different prednisone tablet formulations to assess the feasibility of possible biowaiver / Comparación de los resultados de biodisponibilidad in vitro, in vivo e in silico de diferentes formulaciones de comprimidos de prednisona para evaluar la viabilidad de una posible bioexención

Introducción: Los productos orales sólidos de liberación inmediata que contienen fármacos muy solubles y perme-ables son candidatos para el proceso de bioexención. Este trabajo tiene como objetivo comparar datos in vitro, in silico e in vivo para establecer si las formulaciones de comprimidos orales de prednisona publicadas anteriormente son candidatas a la bioexención. Método: Para lograr este objetivo se realizaron estudios de permeación en células Caco-2. Se aplicó un estudio de bioequivalencia previo entre la formulación de prueba y el medicamento de referencia en una evaluación in silicoutilizando Gastroplus® para evaluar la bioequivalencia de otras dos formulaciones propuestas anteriormente. Resultados: El coeficiente de permeabilidad aparente para prednisona presentó un valor de 3,69 x 10-5 cm/s en 180 minutos. El estudio de bioequivalencia muestra que el producto probado y de referencia era equivalente. Las simulaciones in silicopredijeron con éxito la farmacocinética de las formulaciones probadas y las otras dos, ya que fueron validadas con el estudioin vivo. Ambos exhiben los mismos perfiles de concentración plasmática frente a tiempo. Conclusiones: A través de los resultadosin silico, es posible inferir que las otras dos formulaciones ensayadas pueden ser bioequivalentes respecto al producto de referencia. Este resultado puede ser útil en la solicitud de bio-exenciones. Para reducir los costos y el uso de seres humanos en los estudios de bioequivalencia, este enfoque podría ser una forma esencial de trabajar en la industria farmacéutica. (AU)

Introduction: The immediate-release solid oral products containing very soluble and permeable drugs are candidates for the biowaiver process. This work aims to compare in vitro, in silico, and in vivo data to establish if previously published prednisone oral tablet formulations are biowaiver candidates. Method: To achieve this goal, permeation studies were conducted on Caco-2 cells. A previous bioequivalence study between the test and the reference drug product was applied on an in silico evaluation using Gastroplus® to assess the bioequivalence of two other previously proposed formulations. Results: The apparent permeability coefficient for prednisone presented a value of 3.69 x 10-5 cm/s in 180 minutes. The bioequivalence study shows that the tested and reference product was equivalent. The in silico simulations successfully predicted the pharmacokinetics of the tested and the other two formulations since they were validated with the in vivo study. Both exhibit the same plasma concentration vs. time profiles. Conclusions: Through the in silico results, it is possible to infer that the other two formulations tested may be bioequivalent concerning the reference product. This result may be helpful in biowaiver requesting. Toward to reduce costs and the use of human beings in bioequivalence studies, this approach could be an essential way to work in the pharmaceutical industry. (AU)

In silico bioavailability for BCS class II efavirenz tablets using biorelevant dissolution media for IVIVR and simulation of formulation changes.

OBJECTIVE: This work aims to evaluate the ability of biorelevant dissolution media to simulate the bioavailability of efavirenz tablets, establish an in vitro-in vivo relationship (IVIVR) based on in vivo data using GastroPlus® and simulate formulation changes using DDDPlus™. METHODS: Solubility and drug release profiles were conducted in SLS 0.5% and biorelevant media, such as FaSSIF, FeSSIF, FaSSIF-V2, and FeSSIF-V2. The efavirenz physicochemical properties were used to simulate the plasma concentration profile and compare the simulated pharmacokinetic parameters in fasted and fed states. An IVIVR was developed using Loo-Riegelman as the deconvolution method to estimate drug bioavailability. DDDPlus™ was used to perform virtual trials of formulations to evaluate whether formulations changes and the efavirenz particle size could influence the bioavailability. RESULTS: The drug dissolution displayed higher levels in the biorelevant media that simulated gut-fed state (FeSSIF and FeSSIF-V2). The absorption model successfully predicted the efavirenz pharmacokinetics, and FeSSIF-V2 was chosen as the predictive dissolution media, while an IVIVR was established using the Loo-Riegelman deconvolution method. CONCLUSIONS: The present work provides valuable information about efavirenz solubility and kinetics in the gastrointestinal tract, allowing an IVIVR to support future formulation changes. This understanding is essential for rational science-driven formulation development. At least, this study also showed the validity and applicability of in vitro and in silico tools in the regulatory scenario helping on drug development.

Development of rivaroxaban microemulsion-based hydrogel for transdermal treatment and prevention of venous thromboembolism.

We have developed a microemulsion (ME)-based hydrogel, containing propylene glycol, Azone®, Labrasol®, isobutanol and water (20:3:18:3:56), for the transdermal delivery of rivaroxaban (RVX). Formulation ME-1:RVX, which was loaded with 0.3 mg/g of RVX, presented as a clear, homogenous fluid with a droplet size of 82.01 ± 6.32 nm and a PdI of 0.207 ± 0.01. To provide gelation properties, 20 % (w/w) of Pluronic® F-127 was added to ME-1:RVX to generate formulation PME-1a. An added benefit was an increased capacity for RVX to 0.4 mg/g (formulation PME-1b). PME-1b displayed spherical droplets with a nanoscale diameter as observed by Transmission Electron Microscopy. The release of RVX from PME-1b was 20.71 ± 0.76 µg/cm2 with a permeation through pig epidermis of 18.32 ± 8.87 µg/cm2 as measured in a Franz Cell for 24 h. PME-1b presented a pseudoplastic behavior, pH value compatible with the skin and good stability over 60 days at room and elevated temperatures. The prothrombin time was assessed for each concentration of RVX obtained in the permeation assay and each demonstrated a relevant anticoagulant activity. PME-1b also presented no cytotoxicity against HaCaT cells. Utilizing GastroPlus® software, an in silico analysis was performed to simulate the delivery of PME-1b through a transdermal system that suggested a minimum dose of RVX for the treatment and prevention of venous thromboembolism could be achieved with an 8 h administration regimen. These results suggest that PME-1b is a promising transdermal formulation for the effective delivery of RVX that could be a viable alternative for the treatment and prevention of venous thromboembolism.

Development and validation of a dissolution test for lutein tablets and evaluation of intestinal permeability.

Lutein is a carotenoid with antioxidant activity that is present in various dosage forms. The bioavailability of carotenoid from oral dosage formulations depends on their release, dissolution and its permeability through the gastrointestinal tract. Here, a dissolution test was developed for evaluating formulations and the bioavailability was assessed. The test utilized a USP-apparatus II with rotations of 50, 75 and 100rpm in water with P80 at 1, 2 and 5% (w/v). A non-everted rat intestinal sac model was used in conjunction to assess the intestinal permeability. The most discriminative conditions were 100rpm in water with 2% polysorbate 80, which showed profile differences between two formulations. The intestinal permeation studies showed a lag-time and apparent permeability coefficient that were characteristic of highly permeable drugs. We suggest that a dissolution test can be an essential quality control tool for formulations containing compounds as lutein, although not mandatory by the regulation agencies.

In vitro-in vivo correlation of efavirenz tablets using GastroPlus®.

The aim of the present work was to use GastroPlus™ software for the prediction of pharmacokinetic profiles and in vitro-in vivo correlation (IVIVC) as tools to optimize the development of new generic medications. GastroPlus™ was used to simulate the gastrointestinal compartment and was based on the advanced compartmental absorption and transit model. Powder dissolution and efavirenz tablet dissolution studies were carried out to generate data from which correlation was established. The simulated plasma profile, based on the physicochemical properties of efavirenz, was almost identical to that observed in vivo for biobatches A and B. A level A IVIVC was established for the dissolution method obtained for the generic candidate using the Wagner-Nelson (r (2) = 0.85) and for Loo-Riegelman models (r(2) = 0.92). The percentage of fraction absorbed indicated that 0.5% sodium lauryl sulfate may be considered a biorelevant dissolution medium for efavirenz tablets. The simulation of gastrointestinal bioavailability and IVIVC obtained from immediate-release tablet formulations suggests that GastroPlus™ is a valuable in silico method for IVIVC and for studies directed at developing formulations of class II drugs.

Influence of the efavirenz micronization on tableting and dissolution.

The purpose of this study was to propose an analytical procedure that provides the effects of particle size and surface area on dissolution of efavirenz. Five different batches obtained by different micronization processes and with different particle size distribution and surface area were studied. The preformulation studies and dissolution curves were used to confirm the particle size distribution effect on drug solubility. No polymorphic variety or amorphization was observed in the tested batches and the particle size distribution was determined as directly responsible for the improvement of drug dissolution. The influence of the preparation process on the tablets derived from efavirenz was observed in the final dissolution result in which agglomeration, usually seen in non-lipophilic micronized material, was avoided through the use of an appropriate wet granulation method. For these reasons, micronization may represent one viable alternative for the formulation of brick dust drugs.